This quartz sleeve offers a reliable fit for Wedeco Aquada 1 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 1 Altima, Proxima and Maxima systems.
This quartz sleeve offers a reliable fit for Wedeco Aquada 2/4 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 2/4 Altima, Proxima and Maxima systems.
This quartz sleeve offers a reliable fit for Wedeco Aquada 7/10 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 7/10 Altima, Proxima and Maxima systems
Lamp life depends on the operating conditions of the lamp. Please follow the Original Equipment Manufacturers (OEM) UV lamp maintenance instructions to ensure optimal performance.
UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 1 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 1 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 1 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 1 replacement lamp:
Safe and effective: The Aquada 1 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 1 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 1 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 1 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1825
Wavelength: 254 nm
Power output: 25 watts
Lifespan: Up to 10,000 hours
The Aquada 2/4 replacement lamp is a UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 2/4 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 2/4 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 2/4 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 2/4 replacement lamp:
Safe and effective: The Aquada 2/4 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 2/4 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 2/4 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 2/4 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1845
Wavelength: 254 nm
Power output: 45 watts
Lifespan: Up to 10,000 hours
The Aquada 7/10 replacement lamp is a UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 7/10 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 7/10 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 7/10 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 7/10 replacement lamp:
Safe and effective: The Aquada 7/10 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 7/10 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 7/10 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 7/10 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1880
Wavelength: 254 nm
Power output: 75 watts
Lifespan: Up to 10,000 hours
The Wedeco - 6101276 UV Light Bulb For Germicidal Water Treatment is a four pin single end bulb that has wattage of 320 Watts. The ceramic germicidal lamp bulb has an average lifespan of 10,000 hours after which we recommend that you replace the bulb for better system performance.
With an amalgam four pin single end base, the germicidal water treatment bulb is completely compatible with germicidal OEM Water sterilization filters, UV sanitizers and water purifiers. The UVC light technology is believed to sanitize and kill over 99.99% germs in the water and is most effective against bacteria, molds, virus, protozoa and yeast.
Researchers are of the opinion that UV water purification provides a safe solution as this method of sterilization is a purely physical process and does not alter the pH, chemistry or taste of water. This method is both economic and environmental friendly and is a much better option to chemicals and their bi-products. People are of the opinion that this system provides a safe solution against microorganisms such as giardia and cryptosporidium, that are resistant to chlorine disinfection.
Common Applications:
Well water
Drinking water
Surface water
Municipal water
Wastewater
Food service/processing
Beverage service/processing
Hospitals
Aquaculture
Pools, Spas and Water Features
Chemicals
Oil, Gas and Power
Pulp, paper and wood
Electronics
Cosmetics
Pharmaceuticals
Hotels
Water bottlers
Laboratories
Marine and more
Technical Specification:
Wattage: 320 Watts
Wavelength range: 254NM
Length: 59.53 inches (1512mm)
Base: Amalgam 4 pin, single end
Base Material: Ceramic
Average Lifespan: Up to 10,000 hours
Our Wedeco - SLR 32143/4P UV Light Bulb For Germicidal Water Treatment is a 187 watts UV bulb that has a lamp length of 38.78 inches. The bulb has a base of four pin and is made using ceramic as its base material. The lamp has an average lifespan of 10,000 hours after which it must be replaced for better performance of your system
UV-C light is not a chemical but a physical process, which means that there is no change in the chemistry, pH and taste of water when UV light passes through it. The fixture is high on quality and has low mercury dosage to meet the demands of the environment. Since the light bulbs are intended to destroy microorganisms it is necessary to schedule replacement of the bulbs annually to ensure efficiency of the system. These high-quality lamps can last for approximately 10,000 working hours after which the UV output reduces though the UV lamp emits bright light.
Compatibility:
Ideal Horizons 38595
UVDRX-1613
11270-C
AF25
W00025
Wedeco 6101277
Wedeco 6102167
EcoRay 32143/4P
TAK33
TAK55
Common Applications:
Well water
Drinking water
Surface water
Municipal water
Wastewater
Food service/processing
Beverage service/processing
Hospitals
Aquaculture
Pools, Spas and Water Features
Chemicals
Oil, Gas and Power
Pulp, paper and wood
Electronics
Cosmetics
Pharmaceuticals
Hotels
Water bottlers
Laboratories
Marine and more
Technical Specification:
Wattage: 187 Watts
Wavelength range: 254NM
Length: 38.78 inches (985mm)
Base: 4 pin
Base Material: Ceramic
Average Lifespan: Up to 10,000 hours
This 25W UV unit with full WRAS approval is ideal for 1-3 bedroom homes with no more than 1 bathroom. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 1m³/hour and are fine to be left turned on for long periods (overnight for example).
This system comes with everything you need to fit and run the system for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 85W UV unit with full WRAS approval is ideal for commercial and light industrial applications. They're great for multi-residency water treatment plants, building services and process water applications where the water quality is already pretty good, but there's either an existing bacteriological issue, or there's a high risk that needs safeguarding against.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 225l/min or 13.0m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 55W UV unit with full WRAS approval is ideal for 3-4 bedroom family homes with no more than 2 bathrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 42l/min or 2.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
