Filter Housings

Filtration applications are typically defined by the performance characteristics of the filter cartridge being used, however selecting the right filter housing can optimize and enhance the results achieved from different cartridges. Several factors are important to consider when selecting housings such as system operating pressure, flow rate and pipework requirements, application temperature, chemical compatibility and the housing location/environment.

  • Spectrum Standard Inox Multi Round Filter Housings Filter Housing Spectrum 10" x 2.5" 3

    Spectrum Spectrum Standard Inox Multi Round Filter Housings

    Manufactured from polycoated 316L stainless steel, the Standard range of multi-round filter housings uses an industry standard V-band clamp to secure the head. The housings have threaded ports and they come supplied complete with a universal cartridge plate. The Standard range is capable of operating up to 700lpm, with flow rates beyond this capacity requiring the Premier range. From the 7 x 40″ housing down to the 3 x 10″, these smaller vessels do not require the additional heavy duty features of the Premier range, such as Davit assemblies and swing-bolt lids. With gauge ports, drain ports and a universal cartridge adaptor to accept AA, DOE and 222 end capped cartridges, this range offers a competitive solution for smaller flow rate applications. Key Product Features V-Clamp closure for a secure seal Universal cartridge adaptors securely hold 222, DOE or AA cartridges Drain ports allow for quick and easy cartridge changeout Gauges ports come fitted with 316L plugs when gauges are not required Technical Data SPECTRUM Inox 3/5/7 Standard Filter Housings Technical Data Sheet Drawings SPECTRUM Inox Standard Filter Housing 3 Round DrawingSPECTRUM Inox Standard Filter Housing 5 Round DrawingSPECTRUM Inox Standard Filter Housing 7 Round Drawing

    £1,624.97 - £3,844.79

  • SPECTRUM Inox Premier (PFH) Stainless Steel Housing, 226 Configuration, 30" Filter Housing Spectrum 3/4"

    Spectrum SPECTRUM Inox Premier (PFH) Stainless Steel Housing, 226 Configuration, 30"

    SPECTRUM Inox single round housings were specifically designed in a heavy duty construction to perform in the harshest of application environments with high temperatures, high pressures and challenging liquids. Offering solutions beyond plastic housings, these high grade 316L stainless steel housings suite applications from nominal particulate removal to critical absolute filtration when selecting the appropriate end-capped cartridges.When an application requires an absolute seal, the Premier filter housing (PFH) is the go-to choice in this range of single-round housings. With an electropolished finish and with options to accept either 222 double O-ring fittings or the 226 fitting with locking tabs for additional security, these housings are designed to perform under high pressure and temperatures whilst fulfilling the needs of sub-micron or critical applications.Maximum Pressure: 21 barMaximum Temperature: 93°CFeatures & Information 316L electropolished stainless steel enables more compatibility in critical applications. The threaded ring-nut closure connects the housing body and head and is secured using the closure tool. PFH housings come in either 222 or 226 cartridge connector options wither either Fin or Flat ends for wider application capabilities. Drain plug is fitted with PTFE tape. Housings include: mounting bracket kit with two screws and spring washers. Features & Information Commercial filtration High Temperature installations High Pressure applications Industrial applications

    £1,215.10 - £1,505.27

  • SPECTRUM Inox Premier (PFH) Stainless Steel Housing, 226 Configuration, 10" Filter Housing Spectrum 3/4"

    Spectrum SPECTRUM Inox Premier (PFH) Stainless Steel Housing, 226 Configuration, 10"

    SPECTRUM Inox single round housings were specifically designed in a heavy duty construction to perform in the harshest of application environments with high temperatures, high pressures and challenging liquids. Offering solutions beyond plastic housings, these high grade 316L stainless steel housings suite applications from nominal particulate removal to critical absolute filtration when selecting the appropriate end-capped cartridges.When an application requires an absolute seal, the Premier filter housing (PFH) is the go-to choice in this range of single-round housings. With an electropolished finish and with options to accept either 222 double O-ring fittings or the 226 fitting with locking tabs for additional security, these housings are designed to perform under high pressure and temperatures whilst fulfilling the needs of sub-micron or critical applications.Maximum Pressure: 21 barMaximum Temperature: 93°CFeatures & Information 316L electropolished stainless steel enables more compatibility in critical applications. The threaded ring-nut closure connects the housing body and head and is secured using the closure tool. PFH housings come in either 222 or 226 cartridge connector options wither either Fin or Flat ends for wider application capabilities. Drain plug is fitted with PTFE tape. Housings include: mounting bracket kit with two screws and spring washers. Features & Information Commercial filtration High Temperature installations High Pressure applications Industrial applications

    £1,060.94 - £1,061.99

  • SPECTRUM INOX Premier Filter Housing 1 X 20" 1" Ports & 222 Cup CSF Filter Housing Spectrum Default Title

    Spectrum SPECTRUM INOX Premier Filter Housing 1 X 20" 1" Ports & 222 Cup CSF

    SPECTRUM Inox stainless steel filter housings are designed for the toughest liquid environments involving filtration. The full range of Economic, Standard and Premier are all manufactured from 316L stainless steel. Aggressive chemicals, high temperatures, high pressures and cleanrooms where purity is important are all environments these housings are designed for. The differences between the ranges are designed to cover the diverse circumstances involving aggressive environments in applications. Industrial applications often benefit from using the Economic range as simple double-open-ended (DOE) filter cartridges are accepted and the housing can be placed inline on the pipework or mounted using the bracket provided. This range, rated at 17.2 bar is the lowest priced and comes complete with tie-rod and gasket on the top-nut closure for a secure seal plus an 1/8” drain to reduce liquid spillage during the filter change. Applications where the top-nut arrangement does not suit or higher pressures to 21 bar are required, benefit from the use of the Standard housing range which includes a 1/4” drain and uses a ring closure arrangement and closure tool to secure the housing sump to the head after the filter change. The tie-rod is not present in the Standard range, replaced by a spring in the base for a tight seal which means this range can be used for longitudinal as well as radial cartridges. Critical applications where secure fittings, sub-micron filtration or cartridge fitting compatibility are required, have the solution in the Premier range of housings which offer options of 222 or 226 fitting cups as well as all the benefits of the Standard range, as above.

    £1,061.99

  • SPECTRUM Inox Premier (PFH) Stainless Steel Housing, 222 Configuration, 10" Filter Housing Spectrum Default Title

    Spectrum SPECTRUM Inox Premier (PFH) Stainless Steel Housing, 222 Configuration, 10"

    SPECTRUM Inox stainless steel filter housings are designed for the toughest liquid environments involving filtration. The full range of Economic, Standard and Premier are all manufactured from 316L stainless steel. Aggressive chemicals, high temperatures, high pressures and cleanrooms where purity is important are all environments these housings are designed for. The differences between the ranges are designed to cover the diverse circumstances involving aggressive environments in applications. Industrial applications often benefit from using the Economic range as simple double-open-ended (DOE) filter cartridges are accepted and the housing can be placed inline on the pipework or mounted using the bracket provided. This range, rated at 17.2 bar is the lowest priced and comes complete with tie-rod and gasket on the top-nut closure for a secure seal plus an 1/8” drain to reduce liquid spillage during the filter change. Applications where the top-nut arrangement does not suit or higher pressures to 21 bar are required, benefit from the use of the Standard housing range which includes a 1/4” drain and uses a ring closure arrangement and closure tool to secure the housing sump to the head after the filter change. The tie-rod is not present in the Standard range, replaced by a spring in the base for a tight seal which means this range can be used for longitudinal as well as radial cartridges. Critical applications where secure fittings, sub-micron filtration or cartridge fitting compatibility are required, have the solution in the Premier range of housings which offer options of 222 or 226 fitting cups as well as all the benefits of the Standard range, as above.

    £853.99

  • Spectrum Inox Economic (EFH) Housing, 30", 1" Ports Filter Housing Spectrum

    Spectrum Spectrum Inox Economic (EFH) Housing, 30", 1" Ports

    The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.

    £783.99

  • Spectrum Inox Economic (EFH) Housing, 20", 1" Ports Filter Housing Spectrum

    Spectrum Spectrum Inox Economic (EFH) Housing, 20", 1" Ports

    The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.

    £747.99

  • Spectrum Inox Economic (EFH) Housing, 20", 3/4" Ports Filter Housing Spectrum

    Spectrum Spectrum Inox Economic (EFH) Housing, 20", 3/4" Ports

    The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.

    £747.19

  • Spectrum Inox Economic (EFH) Housing, 20", 1/2" Ports Filter Housing Spectrum

    Spectrum Spectrum Inox Economic (EFH) Housing, 20", 1/2" Ports

    The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.

    £747.99

  • Spectrum Inox Economic (EFH) Housing, 10", 1" Ports Filter Housing Spectrum Default Title

    Spectrum Spectrum Inox Economic (EFH) Housing, 10", 1" Ports

    The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.

    £551.99

  • Spectrum Inox Economic (EFH) Housing, 10", 3/4" Ports Filter Housing Spectrum Default Title

    Spectrum Spectrum Inox Economic (EFH) Housing, 10", 3/4" Ports

    The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.

    £551.33

  • Spectrum Inox Economic (EFH) Housing, 10", 1/2" Ports Filter Housing Spectrum Default Title

    Spectrum Spectrum Inox Economic (EFH) Housing, 10", 1/2" Ports

    The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.

    £551.99

© 2024 GroAqua, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Maestro
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account