Pentair

Carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Lead and other heavy metals removal can be targeted, Cryptosporidium and Giardia cysts removed and developments that produce no fines or Sulphur release is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.Key Product Features Outstanding sediment reduction ensures less plugging, meaning the CFB-Plus achieves its full chlorine reduction capacity 100% more chlorine, taste and odour reduction than original carbon blocks Unique post filtration layer, fused to carbon/fibre media prevents carbon fines being released into the effluent stream Tested and certified by NSF International to ANSI/NSF Standard 42 Manufactured entirely from FDA compliant materials Part Numbers: CFB-PLUS-10, CFB-PLUS-20, CFB-PLUS-30, CFB-PLUS-10BB, CFB-PLUS-20BB

Read more less

Pentair Pentek ChlorPlus carbon block cartridges help reduce sediment while providing greater chloramine performance capacities than granular carbon.The ChlorPlus in its block configuration, reduces chloramine levels to below the guideline 0.1 ppm from a 1 ppm feed for over 26,000 litres in its standard 10" configuration. As a pre-filter in renal applications, these cartridges are the perfect choice for extending membrane life, primarily due to the absence of carbon fines, which are a common by-product of granular carbons.Features and Benefits Superior chloramine and chlorine reduction Unique design reduces carbon fines in filtered water Ideal for POE or POU applications Available in a variety of sizes

Read more less

Pentek EP Series Carbon Block Cartridges are manufactured using a process that yields a cartridge with a nominal 5-micron filtration rating and high dirt-holding capacity. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.These cartridges are protected by a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.EP Series Cartridges make an ideal choice for a wide range of residential, food service, commercial and industrial applications.Features & Benefits High dirt-holding capacity maximizes utilization of the carbon block Highly effective bad taste & odour and chlorine taste & odour reduction Nominal 5-micron rating Specifications Filter Media – Bonded PAC Endcaps – Polypropylene Outer Wrap – Polyolefin Netting – Polyethylene Gaskets – Buna-N Temperature Rating – 40-180°F (4.4-82.2°C) EP-10, EP-20, EP-30, EP-40, EP-20, EP-10, EP-30, EP-40

Read more less

EPM Series cartridges are a modified version of our EP Series cartridge. An economical price makes this cartridge an attractive choice for taste, odor, and chlorine taste & odor reduction, as well as sediment filtration.EPM Series cartridges have a nominal 10-micron filtration rating, high porosity and chlorine taste & odour reduction. The high porosity design helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.These cartridges are protected by an outer wrap designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.Features & Benefits Nominal 10-micron rating Enhanced dirt holding capacity for extended cartridge life Lowest pressure drop Bad taste & odour and chlorine taste & odour reduction Economically priced Specifications Filter Media – Bonded PAC Endcaps – Polypropylene Outer Wrap – Polyolefin Netting – Polyethylene Gaskets – Buna-N Temperature Rating – 40-180°F (4.4-82.2°C)

Read more less

The C-155 carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Manufacturing and development processes that produce no fines or Sulphur release, is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.FEATURES/BENEFITS Cellulose-free construction Resistant to chemical breakdown in both acidic and alkaline solutions up to 180°F (82°C) Integrated post-filtration layer to ensure that no carbon fines are bled into the plating bath. Endcap gaskets are permanently moulded on to the endcaps to ease filter cartridge change-out. APPLICATIONS Electroplating Solutions C155x9.8T, C155x20T, C155x30T, C155x40T

Read more less

Carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Lead and other heavy metals removal can be targeted, Cryptosporidium and Giardia cysts removed and developments that produce no fines or Sulphur release is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced..Features & Benefits Reduces particles as small as 0.5 micron in size by mechanical means NSF/ANSI Standard 53 certified to reduce cysts such as Cryptosporidium and Giardia by mechanical means Premium dirt-holding capacity Outstanding chlorine taste & odour reduction True depth filtration High flow rates and low pressure drop similar to a nominal 10-micron cartridge Maximum life - dirt-holding ability of a 10-micron carbon block with the particulate efficiency of a 0.5-micron cartridge Specifications Filter Media – Bonded PAC Endcaps – Polypropylene Netting – Polyethylene Gaskets – Santoprene Temperature Rating – 40-180°F (4.4-82.2°C)

Read more less

Pentair GAC Series Cartridges effectively reduce unwanted tastes and odours, including chlorine taste & odour from your drinking water.* They are designed to allow maximum contact between the water and carbon, ensuring optimal adsorption.The construction of the cartridge allows water to enter at one end and pass through the entire length of the carbon bed before exiting the other end of the cartridge, while an internal expansion pad minimizes channelling or bypass. Before the water exits the cartridge, a post-filter helps reduce carbon fines and other suspended particles from the filtered water.The post-filter is permanently fastened to an innovative support basket ensuring that it is firmly secured and eliminating any potential for bypass.GAC Series Cartridges are available in a variety of sizes and flow rates, and effectively provide good general-purpose drinking water filtration.Features and Benefits Effective reduction of bad taste & odour and chlorine & odour reduction Designed for optimal adsorption Post-filter to reduce carbon fines Available in a variety of sizes and flow rates

Read more less

Due to the requirements of deionized water in many industries, Pentek has developed the PCF series, mixed-bed deionization cartridges. The FDA grade resin has been subjected to additional post-production steps to minimise the TOC (Total Organic Compounds) level. These high-capacity, semiconductor grade resin cartridges are ideal for use in pharmaceutical, medical, laboratory, cosmetic, and printed circuit board applications. They may also be used in applications where water comes in contact with living organisms, such as fish breeding and potable water applications, and where low TOC and TDS (Total Dissolved Solids) levels are required.These cartridges last longer and produce a higher quality of water when installed after a reverse osmosis or distillation system.Maximum Temperature: 38°CFeatures & Information Designed for deionising water up to 16 megohms Three sizes and capacities

Read more less

The WS series of water softening cartridges are an effective and efficient solution for point-of-use applications that benefit from ease of installation and changeouts.Designed to trap and reduce hardness and scale deposits the WS range is an excellent solution for exact point-of-use applications. These cation exchange softening cartridges use a bed of FDA grade insoluble resin beads to reduce hardness by replacing calcium ions for sodium ones, thereby eliminating the hardness and scale deposit build-ups.Available in three different capacities and flow rates, the convenient and space-saving design of the WS series means softened water can be provided easily and cost effectively at the exact point of need.Maximum Temperature: 38°CFeatures & Information Manufactured with softener resin Available in a variety of sizes for multiple applications Utilise single use resin technologies for maximum life grains (CaCo3) capacity Sodium form

Read more less

Constructed of glass-reinforced nylon, high temperature filter housings are an economical alternative to stainless and carbon steel housings.These ¾ " NPT housings from Pentair, come with a silicone O-ring and are capable of withstanding temperatures up to a maximum of 74°C and handling flow rates up to 76 lpm whilst maintaining excellent chemical compatibility.High temperature housings are an ideal choice for a wide variety of industrial applications, including those involving organic solvents (with the exception of Ketones), seawater, alcohol, petroleum and vegetable oils.Features, Options, & Benefits Ideal for a wide range of industrial applications Available in 10" and 20" lengths Excellent alternative to stainless and carbon housings Durable glass-reinforced nylon construction Specifications Housing Glass-reinforced nylon Cap Glass-reinforced nylon O-ring Slim Line Housings - FKM Standard Housings - Silicone Max. Temperature 74°C Max. Pressure 125 psi (8.62 bar)

Read more less