Products
Pentair Pentair GAC-20 Granular Activated Carbon Filter 20 micron
Pentair GAC Series Cartridges effectively reduce unwanted tastes and odours, including chlorine taste & odour from your drinking water.* They are designed to allow maximum contact between the water and carbon, ensuring optimal adsorption.The construction of the cartridge allows water to enter at one end and pass through the entire length of the carbon bed before exiting the other end of the cartridge, while an internal expansion pad minimizes channelling or bypass. Before the water exits the cartridge, a post-filter helps reduce carbon fines and other suspended particles from the filtered water.The post-filter is permanently fastened to an innovative support basket ensuring that it is firmly secured and eliminating any potential for bypass.GAC Series Cartridges are available in a variety of sizes and flow rates, and effectively provide good general-purpose drinking water filtration.Features and Benefits Effective reduction of bad taste & odour and chlorine & odour reduction Designed for optimal adsorption Post-filter to reduce carbon fines Available in a variety of sizes and flow rates
£44.64
Pentair Pentair PCF1-20MB Mixed-Bed Deionisation (DI) Cartridge, 20"
Due to the requirements of deionized water in many industries, Pentek has developed the PCF series, mixed-bed deionization cartridges. The FDA grade resin has been subjected to additional post-production steps to minimise the TOC (Total Organic Compounds) level. These high-capacity, semiconductor grade resin cartridges are ideal for use in pharmaceutical, medical, laboratory, cosmetic, and printed circuit board applications. They may also be used in applications where water comes in contact with living organisms, such as fish breeding and potable water applications, and where low TOC and TDS (Total Dissolved Solids) levels are required.These cartridges last longer and produce a higher quality of water when installed after a reverse osmosis or distillation system.Maximum Temperature: 38°CFeatures & Information Designed for deionising water up to 16 megohms Three sizes and capacities
£141.54
Pentair Pentair WS-20 Water Softener 20"
The WS series of water softening cartridges are an effective and efficient solution for point-of-use applications that benefit from ease of installation and changeouts.Designed to trap and reduce hardness and scale deposits the WS range is an excellent solution for exact point-of-use applications. These cation exchange softening cartridges use a bed of FDA grade insoluble resin beads to reduce hardness by replacing calcium ions for sodium ones, thereby eliminating the hardness and scale deposit build-ups.Available in three different capacities and flow rates, the convenient and space-saving design of the WS series means softened water can be provided easily and cost effectively at the exact point of need.Maximum Temperature: 38°CFeatures & Information Manufactured with softener resin Available in a variety of sizes for multiple applications Utilise single use resin technologies for maximum life grains (CaCo3) capacity Sodium form
£77.77
Pentair Pentek No.20 High Temperature Standard Housing, 20", 3/4" NPT Ports
Constructed of glass-reinforced nylon, high temperature filter housings are an economical alternative to stainless and carbon steel housings.These ¾ " NPT housings from Pentair, come with a silicone O-ring and are capable of withstanding temperatures up to a maximum of 74°C and handling flow rates up to 76 lpm whilst maintaining excellent chemical compatibility.High temperature housings are an ideal choice for a wide variety of industrial applications, including those involving organic solvents (with the exception of Ketones), seawater, alcohol, petroleum and vegetable oils.Features, Options, & Benefits Ideal for a wide range of industrial applications Available in 10" and 20" lengths Excellent alternative to stainless and carbon housings Durable glass-reinforced nylon construction Specifications Housing Glass-reinforced nylon Cap Glass-reinforced nylon O-ring Slim Line Housings - FKM Standard Housings - Silicone Max. Temperature 74°C Max. Pressure 125 psi (8.62 bar)
£404.72
Prism Prism Core Range Carbon Block 20"
Suited to the industrial sector, the lower capacity Core grade carbon block suits batch process, where a longer service life is not required. Manufactured using acid washed bituminous carbon, a highly microporous structure targets larger organic molecules such as benzene. This ensures the removal of ash and reduces rinse-up fines often found with non-acid washed bituminous carbon. Available in 3 micron sizes, the Core grade carbon block offers flexibility to suit different applications where sediment could plug the carbon before service life is achieved.
£16.00
Prism Prism Max Chloramine Carbon Block, 1 Micron 20"
The PRISM Max grade carbon block is specifically formulated for effective chloramine control and the only cartridge to offer this feature within the range. Having been manufactured within a five-stage process, this exceptional catalytic activated carbon cartridge offers up to 10 times the capacity of the Plus grade. Essential for use in public water supplies where chloramine has been added as the disinfecting agent of choice, the Max grade carbon block will typically be found within applications including aquatics and renal dialysis. Rated at one micron, pre-filtration from the PRISM spun range, such as the Plus grade DSPP at five micron, is recommended to maximise service life and prevent premature blocking.
£51.20
Prism Prism Value Range Carbon Block 5 Micron 20"
The honest answer to a solely price driven market, the PRISM Value carbon block prioritises cost at the sacrifice of chlorine capacity. Specifically designed for industrial batch process applications, where the full capacity of the cartridge is not used, the value carbon block's high binder content results in a strong cartridge with moderate chlorine reduction efficiency.
£10.00
Spectrum Spectrum ECB Economy Carbon Block 20"
Suited to the industrial sector, the lower capacity ECB suits batch process, where a longer service life is not required. For 2019, the carbon formulation has been upgraded, significantly improving chlorine removal efficiency to 60% from 35%, serving for a more reliable and dependable economic block. Manufactured using acid washed bituminous carbon, a highly microporous structure targets larger organic molecules such as benzene. This ensures the removal of ash and reduces rinse-up fines often found with non-acid washed bituminous carbon. Available in 3 micron sizes, the ECB offers flexibility to suit different applications where sediment could plug the carbon before service life is achieved.
£26.70
Spectrum Spectrum Inox Economic (EFH) Housing, 20", 1" Ports
The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.
£747.99
Spectrum Spectrum Inox Economic (EFH) Housing, 20", 1/2" Ports
The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.
£747.99
Spectrum Spectrum Inox Economic (EFH) Housing, 20", 3/4" Ports
The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.
£747.19
Spectrum SPECTRUM INOX Premier Filter Housing 1 X 20" 1" Ports & 222 Cup CSF
SPECTRUM Inox stainless steel filter housings are designed for the toughest liquid environments involving filtration. The full range of Economic, Standard and Premier are all manufactured from 316L stainless steel. Aggressive chemicals, high temperatures, high pressures and cleanrooms where purity is important are all environments these housings are designed for. The differences between the ranges are designed to cover the diverse circumstances involving aggressive environments in applications. Industrial applications often benefit from using the Economic range as simple double-open-ended (DOE) filter cartridges are accepted and the housing can be placed inline on the pipework or mounted using the bracket provided. This range, rated at 17.2 bar is the lowest priced and comes complete with tie-rod and gasket on the top-nut closure for a secure seal plus an 1/8” drain to reduce liquid spillage during the filter change. Applications where the top-nut arrangement does not suit or higher pressures to 21 bar are required, benefit from the use of the Standard housing range which includes a 1/4” drain and uses a ring closure arrangement and closure tool to secure the housing sump to the head after the filter change. The tie-rod is not present in the Standard range, replaced by a spring in the base for a tight seal which means this range can be used for longitudinal as well as radial cartridges. Critical applications where secure fittings, sub-micron filtration or cartridge fitting compatibility are required, have the solution in the Premier range of housings which offer options of 222 or 226 fitting cups as well as all the benefits of the Standard range, as above.
£1,061.99
