Products

Carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Lead and other heavy metals removal can be targeted, Cryptosporidium and Giardia cysts removed and developments that produce no fines or Sulphur release is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.Key Product Features•Outstanding sediment reduction ensures less plugging, meaning the CFB-Plus achieves its full chlorine reduction capacity•100% more chlorine, taste and odour reduction than original carbon blocks•Unique post filtration layer, fused to carbon/fibre media prevents carbon fines being released into the effluent stream•Tested and certified by NSF International to ANSI/NSF Standard 42•Manufactured entirely from FDA compliant materialsPart Numbers: CFB-PLUS-10, CFB-PLUS-20, CFB-PLUS-30, CFB-PLUS-10BB, CFB-PLUS-20BB

Read more less

Pentek EP Series Carbon Block Cartridges are manufactured using a process that yields a cartridge with a nominal 5-micron filtration rating and high dirt-holding capacity. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.These cartridges are protected by a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.EP Series Cartridges make an ideal choice for a wide range of residential, food service, commercial and industrial applications.Features & Benefits High dirt-holding capacity maximizes utilization of the carbon block Highly effective bad taste & odour and chlorine taste & odour reduction Nominal 5-micron rating Specifications Filter Media – Bonded PAC Endcaps – Polypropylene Outer Wrap – Polyolefin Netting – Polyethylene Gaskets – Buna-N Temperature Rating – 40-180°F (4.4-82.2°C)

Read more less

The PRISM Max grade carbon block is specifically formulated for effective chloramine control and the only cartridge to offer this feature within the range. Having been manufactured within a five-stage process, this exceptional catalytic activated carbon cartridge offers up to 10 times the capacity of the Plus grade. Essential for use in public water supplies where chloramine has been added as the disinfecting agent of choice, the Max grade carbon block will typically be found within applications including aquatics and renal dialysis. Rated at one micron, pre-filtration from the PRISM spun range, such as the Plus grade DSPP at five micron, is recommended to maximise service life and prevent premature blocking.

Read more less

Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction Filtration Media: Polypropylene End caps and Adapters: Polypropylene Dimensions Nominal Outside Diameter: 2.50 inch (6.4 cm) Nominal Inside Diameter: 1 inch (2.5 cm) Operating Limits Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C) Maximum Temperature: 160°F (71°C) at =15psid (1.0bar) Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length

Read more less

The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.

Read more less

SPECTRUM Inox single round housings were specifically designed in a heavy duty construction to perform in the harshest of application environments with high temperatures, high pressures and challenging liquids. Offering solutions beyond plastic housings, these high grade 316L stainless steel housings suite applications from nominal particulate removal to critical absolute filtration when selecting the appropriate end-capped cartridges.When an application requires an absolute seal, the Premier filter housing (PFH) is the go-to choice in this range of single-round housings. With an electropolished finish and with options to accept either 222 double O-ring fittings or the 226 fitting with locking tabs for additional security, these housings are designed to perform under high pressure and temperatures whilst fulfilling the needs of sub-micron or critical applications.Maximum Pressure: 21 barMaximum Temperature: 93°CFeatures & Information 316L electropolished stainless steel enables more compatibility in critical applications. The threaded ring-nut closure connects the housing body and head and is secured using the closure tool. PFH housings come in either 222 or 226 cartridge connector options wither either Fin or Flat ends for wider application capabilities. Drain plug is fitted with PTFE tape. Housings include: mounting bracket kit with two screws and spring washers. Features & Information Commercial filtration High Temperature installations High Pressure applications Industrial applications

Read more less

Food and Beverage production requires crevice-free pipework and equipment to reduce the possibility of microbiological growth within the system. SPECTRUM Inox Sanitary housings meet these requirements, as well as Good Manufacturing Practice (GMP) design guidelines, with an industry leading internal surface finish of 0.3µm roughness average (Ra). Satisfying the specification needs of the Life Sciences industry, housings are supplied with tri-clamp inlet and outlet ports, with sanitary style drain ports for complete emptying of the vessel during clean down procedures. Engineered to the highest standard, these housings have gone through an extensive design process to control microbiological adhesion and promote continued high-quality final product. The range is manufactured from 316L stainless steel and machine polished to produce a crevice-free finish, suitable for full sanitisation and clean down. Tri-clamp connections and a swing bolts provide efficient cartridge changeout, eliminating the need for additional tools and reducing system downtime. Key Product Features 0.3μm Ra internal surface finish Tri-clamp ports for industry compatibility Diaphragmed pressure gauge included to filter monitoring Vent / test port for pressure release and integrity testing Accepts 226 end-cap for added security and reduced bypass FDA Compliant Materials PED Compliant Article 4, Paragraph 3 Group 2 Liquids

Read more less

Suitable for the polishing of trace hydrocarbons, the OilOut-99 is capable of absorbing up to three times its own weight before changeout is required. Designed to remove up to 99% of dispersed hydrocarbons, the SPECTRUM SRIF is suited to applications where the inlet contamination is below 500mg/l, such as surface run off water, CNC machine coolant and bilge separators. The OilOut-99 achieves best results as a polishing phase after primary oil removal technologies or in a double-pass system and is effective at removing a range of contaminants, including mineral oils and BTEX hydrocarbons.

Read more less

The SPECTRUM PCB is specifically formulated for effective chloramine control and the only cartridge to offer this feature within the range. Having been manufactured within a five-stage process, this exceptional catalytic activated carbon cartridge offers up to 10 times the capacity of the SCB. Essential for use in public water supplies where chloramine has been added as the disinfecting agent of choice, the PCB will typically be found within applications including aquatics and renal dialysis. Rated at one micron, pre-filtration from the SPECTRUM TruDepth range, such as the PSP at five micron, is recommended to maximise service life and prevent premature blocking.

Read more less

With higher efficiency and a longer service life than both the Economic and Standard spun, the PSP is the most versatile and adept cartridge in the TruDepth range. The deep grooved construction significantly increases the surface area, maximising the dirt holding capacity of the cartridge whilst the integral support core increases pressure and temperature operating conditions. Available with a range of end-caps for added seal security and operator ease for fitting in multi-round housings.

Read more less

SPECTRUM 870 range of activated carbon block cartridges treat water by removing the bad taste, odour and appearance associated with chemical and organic pollutants.Contaminants such as chlorine, chloramine, herbicides, solvents and dyes are all treated along with the removal of organics through absorption. Food grade coconut carbon block with higher efficiency and capacity chlorine, chemical and organic taste, odour and appearance removal.Features & Information Extruded from high quality carbon fines the SCB has a much high adsorption capacity, extending life and improved chlorine reduction capacities over the ECB The fine, acid washed bituminous, powdered activated carbon (PAC) used in the SCB results in a highly efficient carbon cartridge with sediment filtration capabilities Constructed with an outer polypropylene wrap that protects and extends the life of the carbon block, capturing particles and preventing premature plugging Food grade additives used to bond the PAC Available in large diameter 9¾" and 20" lengths for reduced cartridge changeout frequency

Read more less

Basic technology that works, the SPECTRUM Wound range is perfectly suited as a pre-filter to protect more expensive secondary or final filtration systems.The SPECTRUM Wound polypropylene range is offered in a wide span of micron ratings (0.5 to 150), offering cost effective particulate filtration with a tried and tested history to prove it.General use, polypropylene-on-polypropylene corePolypropylene (max temp. 65°C)Easily the most popular cartridge media, having a broad chemical compatibility, good temperature resistance and low cost, this standard and large diameter filter is an effective solution for many applications.Features & Information Exact computer controlled wound pattern delivers reliable particulate removal throughout its media Available in a wide range of micron sizes from 0.5 - 150 are available in standard diameter, 10" to 40" lengths Available in large diameter 10" and 20" lengths for reduced cartridge changeout frequency Constructed with polypropylene media on a polypropylene core Graded density construction ensures high dirt-holding capacity Applications & Industries Sand, silt and rust removal Manufacturing chemicals Metal finishing Surface coating Valve, pump or nozzle protection

Read more less