The Aquada 7/10 replacement lamp is a UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 7/10 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 7/10 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 7/10 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 7/10 replacement lamp:
Safe and effective: The Aquada 7/10 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 7/10 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 7/10 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 7/10 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1880
Wavelength: 254 nm
Power output: 75 watts
Lifespan: Up to 10,000 hours
S810RL ultraviolet lamp.
Used in Sterilight and Viqua uv systems.
Length – 810 mm (31.90 inches).
Base – 4 pins stepped.
Full one-year warranty.
100% compatible with the OEM
Replace your lamp every 9000 hours or 12 months.
The Philips TUV 8W G8T5 is a ultraviolet or germicidal lamp. They are used in air purification and water disinfection systems. Common applications include air conditioning, private water supplies and aquaculture. We recommend replacing your lamp after 9000 hours or every 12 months to ensure maximum disinfection.
Type – Philips TUV 8W G8T5
Application – Air and Water Treatment
Power – 8 watts
Length – 300 mm
Cap – 2 pins
The Replacement Quartz Sleeve for Philips G30T8 and G55T8 UV Light Bulb for Germicidal Water Treatment is an open ended, high quality quartz sleeve that works well with water sterilisation filters, UV sterilisers and purifiers.
Common Applications:
Well water
Drinking water
Surface water
Municipal water
Wastewater
Food service/processing
Beverage service/processing
HVAC and Air Conditioning units
Air purifier/treatment systems
Hospitals
Aquaculture
Pools, Spas and Water Features
Chemicals
Oil, Gas and Power
Pulp, paper and wood
Electronics
Cosmetics
Pharmaceuticals
Hotels
Water bottlers
Laboratories
Surface disinfection
Marine and more
QS-463 replacement quartz sleeve.
Used in conjunction with S463RL lamp.
Fits into Sterilight and Viqua S5Q, S5Q-PA, S5Q-Gold and SSM-24 uv disinfecion systems.
Supplied with two replacement O-rings.
High quality, fire polished quartz sleeve.
Length – 502mm
End Type – Open Both Ends
Layers of minerals and contaminants form over time on the surface of the quartz sleeve, impeding the strength or dosage of ultraviolet light into the water. The quartz sleeve be cleaned every 12 months when replacing the uv lamp. Depending on the quality of your water, you may need to remove the quartz sleeve and clean it every few months. We recommend replacing the quartz sleeve every 24 months.
The Philips TUV 6W G6T5 is a ultraviolet lamp which is used to purify air, water and hard surfaces. They are used in private water supplies, air conditioning units and aquaculture. We recommend replacing this lamp after 9000 hours or 12 months service. UV Lamps replaced annually ensure high system efficacy and maximum disinfection.
Lamp – Philips TUV 6W G6T5
Application – UV Disinfection
Power – 6 watts
Length – 226 mm
Cap – 2 pin
Life – 9000 hours
The Replacement Quartz Sleeve for Philips G15T8 and G25T8 UV Light Bulb for Germicidal Water Treatment is an open ended, high quality quartz sleeve that works well with water sterilisation filters, UV sterilisers and purifiers.
Common Applications:
Well water
Drinking water
Surface water
Municipal water
Wastewater
Food service/processing
Beverage service/processing
HVAC and Air Conditioning units
Air purifier/treatment systems
Hospitals
Aquaculture
Pools, Spas and Water Features
Chemicals
Oil, Gas and Power
Pulp, paper and wood
Electronics
Cosmetics
Pharmaceuticals
Hotels
Water bottlers
Laboratories
Surface disinfection
Marine and more
QS-330 Quartz Sleeve.
Used in conjunction with S330RL lamp.
Fits into Sterilight and Viqua VT4, S2Q-PA, SSM-17 and SC4 UV systems.
Supplied with two replacement O-rings.
High quality, fire polished quartz sleeve.
Length – 375 mm.
End Type – Open Both Ends.
Layers of minerals and contaminants form over time on the surface of the quartz sleeve, impeding the strength or dosage of ultraviolet light into the water. The quartz sleeve be cleaned every 12 months when replacing the uv lamp. Depending on the quality of your water, you may need to remove the quartz sleeve and clean it every few months.
We recommend replacing the quartz sleeve every 24 months.
This quartz sleeve offers a reliable fit for Wedeco Aquada 1 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 1 Altima, Proxima and Maxima systems.
The Aquada 7/10 replacement lamp is a UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 7/10 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 7/10 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 7/10 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 7/10 replacement lamp:
Safe and effective: The Aquada 7/10 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 7/10 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 7/10 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 7/10 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1880
Wavelength: 254 nm
Power output: 75 watts
Lifespan: Up to 10,000 hours
UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 1 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 1 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 1 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 1 replacement lamp:
Safe and effective: The Aquada 1 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 1 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 1 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 1 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1825
Wavelength: 254 nm
Power output: 25 watts
Lifespan: Up to 10,000 hours
